Ready to get certified? Register & Apply for your certification on

Exemplar LINK

MIL-STD EMC Engineer

General Overview

iNARTE Military Standard (MIL-STD) EMC Specialist Certification

The iNARTE Military Standard (MIL-STD) EMC Specialist Certification Program is applicable to military engineers and technicians practicing in EMC fields to address their specific needs. MIL-STD EMC Specialists who already hold, or who obtain an iNARTE EMC certification can add this credential as an endorsement to that certificate once all criteria have been met. There is an important section of the EMC community dedicated to supporting military requirements and iNARTE certification addresses this need with this special recognition program and examination.

How to Apply

If you’re already an iNARTE certified EMC professional

  • Go to and login to your portal
  • Select Current Certifications
  • Select Upgrade to EMC Military Standard Specialist
  • Complete the application. Also upload your current resume/cv.
  • Please note: You will need to sit for the MIL-STD examination that will need to be passed at 70 percent before your application can be approved.

If you’re NOT an iNARTE certified EMC professional

  • Review the Requirements and Code of Ethics
  • Go to to create and login to your portal
  • Select the Manage My Certifications tab, then iNARTE, then Apply for Certification
  • Select either EMC Engineer or Technician Military Standard Specialist
  • Please note: You will need to sit for the iNARTE Electromagnetic Compatibility examination and the MIL-STD examinations. Both will need to be passed at 70 percent before your application can be approved.

Current and past service members can apply for iNARTE Certification for free with proof of service.

Ongoing Certification Requirements

Click below button to download continuing professional development log to submit with your renewal.

Click here to download CPD log

Code of Ethics

Click here to download the iNARTE Code of Ethics

Exam Preparation

  • The exam is four hours in duration. All questions are multiple choice.
  • The exam is 50 questions, and all should be attempted.
  • The exam is open book, open notes and a scientific calculator is allowed.
  • The pass mark is 70% or above. Retake is possible after 90 days. There will be no credit for past exam scores.

Exam Coordination

Once your MIL-STD application fee is received and you are ready to take the examination, Exemplar Global will coordinate and arrange for a testing date, time, location and point of contact.

The examination is 4 hours in duration. All examinations are given open book.

Examinations are graded at the Exemplar Global principal office and the applicant will be advised of a pass/fail within 10 working days.

Passing score 70% average. Should a candidate fail the examination, a retake is permissible following a 90-day period. Examinations may be retaken any number of times; however, an examination processing fee is required each time the exam is taken.

Candidates retaking the examination must achieve a passing grade at one 4-hour session and will not be allowed to take credit for grades achieved in parts of earlier sessions.

Frequently Asked Questions

How do I apply for certification?

Before you apply for certification, please ensure that you meet all the requirements specific to the scheme you wish to apply for. You can review those requirements on our website. These can be found by clicking on the ‘Individual Auditors’ tab at the top-level navigation of our homepage. From the drop-down menu, select the ‘Browse All Certifications’ option. From there, you will be taken to a page that features the different categories of certifications we offer, including Electrostatic Discharge, Product Safety, etc. Select the scheme you are are interested in and click the ‘Learn More’ button. You will then be taken through to your selected scheme page. From there,  click on the ‘Download Certification Requirements’ button on the right hand side of the page. Please review the requirements carefully to ensure that you meet the scheme, grade and scope requirements.

If you are a new customer, you will need to create an account with Exemplar LINK, our customer portal platform. You can access Exemplar LINK via or via the Exemplar LINK login button on our website. From there, you can enter your contact details and create your account.

Once you have an account, either as a new customer or as an existing customer, you can apply for certification by following these steps:

  1. Login to Exemplar LINK at
  2. Click on the ‘Manage My Certifications’ button, located at the top-hand navigation.
  3. Click on the ‘Apply for Certification’ button.
  4. Select the category of certification you are interested in, such as Electromagnetic Compatibility.
  5. Click on the specific certification you wish to apply for, such as EMC Engineer.
  6. Select Qualification-Based certification, if prompted. This will vary by scheme.
  7. Review the the certification, recertification, and expansion requirements relevant to your scheme and grade, and click the ‘Continue to Scopes’ button  at the bottom of the page. Please refer to the PDF Scope document for criteria.
  8. Select any scopes you wish to apply for and click on the ‘Continue To Code of Conduct’ button at the bottom of the page.
  9. Tick the box next to each item in the Code of Conduct. By doing so, you agree to adhere to this code. Failure to do so may result in the termination of your certification. Click on the ‘Continue To Authorisation’ button.
  10. If your organization has given you an authorisation code, please enter it here and click the ‘Validate’ button. If not, click on the ‘Continue to Payment’ button.
  11. Carefully review your application information and payment options.
  12. Finally, click the ‘Pay Now’ button. Please note that all fees are non-refundable, so ensure you meet the certification requirements before applying for certification. Also, we are required to collect GST from our Australian customers.

Once we have received your application, an Exemplar Global certification specialist will contact you if any additional information or steps are required.

How do I check on the status of my application for certification?

You can check on the status of your application for certification via our Exemplar LINK platform at At the top-level navigation, select the ‘Manage My Certifications’ button and from the drop- down menu choose the iNARTE option. From there, select the ‘Current Certifications’ tab. You will then be taken through to the ‘Applications in Progress’ page where you can check the status of your certification application.

Where are the documents I uploaded in support of my application for certification?

Once you submit your application for certification, you will not be able to see the documents you have uploaded to support your application. Please contact your certification specialist or if you need assistance.

How long does it take to process my application for certification?

It usually takes between seven to 10 business days to complete this process. However, this is provided that all supporting documents have been uploaded by the applicant.


Before You Apply For a Certification

Download the “Certification Requirements” document from the certification page you wish to apply for.
Carefully review the requirements to see if you have the qualification (training) needed and have met the scheme, grade, and scope.

Steps to Apply for iNARTE Certification

  • Register

    Go on to Exemplar LINK to sign up and register your details

  • Login

    Login to Exemplar LINK & continue to: Manage My Certifications > iNARTE > Apply for Certification

  • Select

    Select the Certification you want to apply for

  • Submit

    Upload your Resume

Ready to get certified? Register & Apply for your certification on

Exemplar LINK

Can't find what you're looking for?


Have a question?

Search our FAQs:

Our FAQs page can answer some of the most common questions, just click a topic below:

Apply for Certification

Career Center

Exemplar LINK

Fees, Certificates, ID Cards, Payment



Technical Problems


Upgrade/Expand Certification

Work Style Assessment


Still can't find the information you need? Visit our contact us page to get in touch.

Contact Us